Aileron bell crank build

by | Jan 21, 2019 | Rans S20 Build

Each of the Bell-Cranks went together fairly easily.  The instructions were easy to understand and implement.  A decent amount of time was spent on cutting the bushing that allows the Bell-Crank to swivel easily.  The bushing was to be cut to 1.06″, which is a bit difficult to cut by hand.  However, using a pipe cutter and digital caliper, I cut to 1.10″ and filed down to 1.06″.

15 + 6 =

Content Protected Using Blog Protector By: PcDrome.
Verified by MonsterInsights