Panel Tray Design

I measured and cut the tray to its maximum size that would enable it to appropriately line up with the outer fuselage tubes where the cowling is mounted. I then used a sharpee to mark the location of the support fuselage tubes. Afterward, I physically located each of...
Under-Seat Panel Right

Under-Seat Panel Right

The right-side panel holds the aileron autopilot servo and the ELT. The aluminum used to build the panel was T6061. I was able to find a number of pics from other builders that helped with the initial design. Right Side – Option with both Servos Final setup...
AP Servo Mount Brackets

AP Servo Mount Brackets

Like every other project in building this aircraft, I have never tried to cut aluminum with any degree of accuracy. Maybe in the past, I might have grabbed a piece of aluminum or a pipe and used a hacksaw for some simple project but never trying to produce something...
Content Protected Using Blog Protector By: PcDrome.
Verified by MonsterInsights