Rudder – Covering

by | Dec 1, 2019 | Rans S20 Build, Rans S20 Fabric

The rudder required additional time to fit around the outside curve. It was not difficult, just slower than other pieces. The biggest challenge was cutting the fabric around the hinges. One area of struggle is gluing down the fabric at the edges. The fabric wants to disengage from the tube. I’m not sure if this is the result of low temperature in the garage, if I’m not letting the fabric “dry” to the tube after tacking, or if I’m not using enough glue during initial application to the tube.

ADD MORE INFO WHEN PATCHES AND TAPES ARE APPLIED.

9 + 4 =

Content Protected Using Blog Protector By: PcDrome.
Verified by MonsterInsights